Sorry for the questionnaire, thanks in advance. The Top-Longer USB 2.0 S-Video & Composite Video Capture Cable offers an easy to use video capture solution, enabling you to grab video from an S-Video or Composite video source, as well as the accompanying 2-channel RCA audio, to your Mac or Windows computer. Maybe these questions are obvious, but i´m a post analog video guy ) Main Features Supports Analog Video & Audio Capture Supports NTSC, PAL video capture ( Does not support SECAM.) Supports 1920 x 1080, 720x480 (NTSC) / 720x576 (PAL) USB 2. The camera works at 60fps interlaced mode, i think with a deinterlace freeframe plugin would be enough to be used for computer vision, isn´t it? Connects to PS1/2, SFC, N64, GC, Wii U, Xbox 360, PSP-2000 and record game play footage from consoles with SD video out. I read also that EyeCon (Frieder Weiss) is developed mostly for this card with some “special” drivers, i think for better response, lower latency ¿?.ītw, is there any difference in latency/performance between the PCI and PCIe model? I´m thinking to buy the Falcon PCI card and a used Hitachi industrial monochrome EIA camera for my setup (i hope enough NIR sensitive, i didn´t find any info about the spectral response), instead of firewire solution, mostly after the nightmare with the Imaging Source drivers.Īnyone with experience with this capture card and vvvv? i saw that there is a wdm driver. ![]() There is also a very useful documentation about tracking here (thanks! wirmachenbunt, and Frank):Ĭould someone confirm it? or tell me the best setup to work with very, very low latency? ![]() PhoioDV FireWire Card 9 includes PhotoDV frame grabber utility for high. Making some research i´ve found some information explaining that the lowest latency way to capture live video, is using an analog camera and a frame grabber, it has bigger resolution (PAL) and also the analog video cables are cheaper (& longer) than firewire or usb ones. The Pengo Technology 1080p HDMI to USB Type-C Video Grabber, in titanium gray, allows you to capture up to 1080p60 video resolution from game consoles, cameras, and other devices via an HDMI input port, and to send the video to a Mac or Windows computer over a USB output for live streaming. 95 EVC- 7575 Converts NTSC Pal or SECAM Video into NTSC or Pal video output. I´ve always used firewire or usb cameras (mainly because i´ve used only laptops for the performances) and i´ve noticed that there is an appreciable latency in the video signal even using a simple tracking chain (2 or 3 render passes), this is not really important in the most of the situations, but in others it kills the illusion in a performance. Maybe you are a little boring to talk about cameras, but i would need some suggestions.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |